Model Number: WS-C3560G-48TS-S
Manufacturer: CISCO
Product Condition: Used
The Cisco Catalyst 3560 is a line of fixed-configuration, enterprise-class switch. The Cisco Catalyst 3560 is an ideal access layer switch for small enterprise LAN access or branch offices configurations for maximum productivity and investment protection while enabling the deployment of new applications such as IP telephony, wireless access, video surveillance, building management systems, and remote video kiosks. Customers can deploy networkwide intelligent services, such as advanced quality of service (QoS), rate limiting, access control lists (ACLs), multicast management, and high-performance IP routing, while maintaining the simplicity of traditional LAN switching.
Interfaces/Ports |
Number of Ports |
48 |
Gigabit Ethernet Port |
Yes |
Interfaces/Ports |
48 x RJ-45 10/100/1000Base-T LAN |
Interfaces/Ports |
1 x RJ-45 Console Management |
Media & Performance |
Connectivity Media |
Category 3 UTP 10Base-T |
Connectivity Media |
Category 4 UTP 10Base-T |
Connectivity Media |
Category 5 UTP 10/100/1000Base-T |
Performance |
64Gbps Switching Fabric |
Performance |
38.7Mpps Forwarding Rate For 64-byte Packet |
I/O Expansions |
Number of Expansion Slots |
4 |
Expansion Slots |
(4 Total) SFP (mini-GBIC) |
Network & Communication |
Flow Control |
IEEE 802.3x (Full-duplex) |
Layer Support |
2 |
Layer Support |
3 |
Layer Support |
4 |
Address Table |
12 K MAC Address - Maximum |
Management & Protocols |
Manageable |
Yes |
Management |
- SNMPv1, SNMPv2c, and SNMPv3
- policy management
- Command-line interface (CLI)
- Resource Manager Essentials
- Web-based management
- Cisco Network Assistant Software
- CiscoWorks network-management software
- Four thousand VLAN IDs are supported
- Management console port: RJ-45-to-DB-9 cable for PC connections
- Service Assurance Agent (SAA) support facilitates service-level management throughout the LAN.
- Up to 1024 VLANs per switch or stack and up to 128 spanning-tree instances per switch are supported
- Embedded Remote Monitoring (RMON) software agent supports four RMON groups (history, statistics, alarms, and events).
- VLAN trunks can be created from any port, using either standards-based 802.1Q tagging or the Cisco Inter-Switch Link (ISL) VLAN architecture.
- Remote SPAN (RSPAN) allows administrators to remotely monitor ports in a Layer 2 switch network from any other switch in the same network.
|
Protocols |
WCCP |
Protocols |
LACP |
Protocols |
DHCP |
Protocols |
DTP |
Protocols |
PAgP |
Protocols |
RSTP |
Protocols |
HSRP |
Protocols |
UDLD |
Protocols |
RIP v1.0 |
Protocols |
RIP v2.0 |
Protocols |
PIM-SM |
Protocols |
PIM-DM |
Protocols |
DVMRP |
Protocols |
STP |
Protocols |
MSTP |
Protocols |
ARP |
Protocols |
TCP/IP |
Protocols |
TACACS+ |
Protocols |
NTP |
Protocols |
SSH |
Protocols |
SNMP |
Protocols |
Telnet |
Security Features |
- Secure Shell (SSH) Protocol Version 2
- (IDS) to take action when an intruder is detected.
- One thousand access control entries (ACEs) are supported
- TACACS+ and RADIUS authentication enable centralized control of the switch
- IEEE 802.1x allows dynamic, port-based security, providing user authentication
- Port security secures the access to an access or trunk port based on MAC address
- Unicast MAC filtering prevents the forwarding of any type of packet with a matching MAC address.
- Port-based ACLs (PACLs) for Layer 2 interfaces allow application of security policies on individual switch ports.
- Cisco security VLAN ACLs (VACLs) on all VLANs prevent unauthorized data flows from being bridged within VLANs.
- Bidirectional data support on the Switched Port Analyzer (SPAN) port allows the Cisco Secure Intrusion Detection System.
|
Memory |
Standard Memory |
128 MB |
Memory Technology |
DRAM |
Flash Memory |
32 MB |
Software |
Operating System |
- Standard Multilayer Software Image (SMI) installed
|
Controls/Indicators |
Status Indicators |
Per-port status LEDs:
- Link integrity
- Disabled
- Activity
- Speed
- Full-duplex indications
System-status LEDs:
- System
- RPS
- Link status
- Link duplex
- Link speed
|
Reliability |
MTBF |
19.8 Year |
Power Description |
Input Voltage |
110 V AC |
Input Voltage |
220 V AC |
Input Voltage Range |
100 V AC to 240 V AC |
Input Current |
1.50 Ato 3 A |
Input Current |
17.50 A @ 12 V DC |
Frequency |
50 Hz or 60 Hz |
Power Consumption |
160 W @ Maximum |
Power Source |
Power Supply |
Redundant Power Supply |
Yes |
Environmental Conditions |
Temperature |
32°F (0°C) to 113°F (45°C) Operating |
Temperature |
-13°F (-25°C) to 158°F (70°C) Storage |
Humidity |
10% to 85% Non-condensing Relative Humidity Operating |
Altitude |
10000 ft Operating |
Altitude |
15000 ft Storage |
Thermal Dissipation |
580.06 BTU/h @ 156.50 W |
Physical Characteristics |
Dimensions |
1.73" Height x 17.50" Width x 16.10" Depth |
Weight (Approximate) |
14 lb |
Miscellaneous |
Additional Information |
- Configurable up to 11,000 unicast routes
- Configurable up to 1000 IGMP groups and multicast routes
- Acoustic Noise: 48 dBa
- DC Input Voltages (RPS Input): 10.5A
- Power Rating: 0.16 kVA
- Telco: Common Language Equipment Identifier (CLEI) code
- Configurable maximum transmission unit (MTU) of up to 9000 bytes, with a maximum Ethernet frame size of 9018 bytes (Jumbo frames), for bridging on Gigabit Ethernet ports, and up to 1546 bytes for bridging of Multiprotocol Label Switching (MPLS) tagged frames on 10/100 ports.
QoS and Control:
- Advanced QoS
- Granular Rate Limiting: The Cisco Committed Information Rate (CIR) function guarantees bandwidth in increments as low as 8 kbps.
|
Lifetime warranty for all rackmount kits and nonelectronic equipment.
90 day warranty on all equipment.
Returns for a refund are accepted for 14 days after the date your item was received, however the buyer is responsible for all shipping costs incurred both ways and this amount will be deducted from the refund amount.